06.01.2021  Author: admin   Home Woodworking Projects
Do any ladders have broken or missing steps, checkkist, or cleats, broken side rails, or other faulty equipment? Are buckles and connectors free of damage or wear including corrosion, warping, cracking, etc. Are aisles properly marked and kept clear? Are floor coverings in good condition, free of slip or trip hazards? Are load capacities clearly marked and carpentry shop safety checklist 12 on all scaffolds? Are stairwells well lit? Fall Protection.

Are all utility lines sewer, water, electrical, telecom, Carpentry Shop Safety Rules Kit etc. Are ladders or ramps provided for access and egress? Are excavations free of standing or accumulating water? Are trench faces properly secured from cave-in? Is air quality in the trench safe for workers?

Are trench edges at surface level clearly marked or guarded to prevent accidental falls? Is the area around the excavation free of sources of vibration that may contribute to cave-in? Fall Protection. Completion date. Are floor openings guarded by a cover, guardrail or equivalent on all sides? Are portions of pits not actually in use either covered or protected by guardrails or equivalent? Are fall harnesses, tethers, connections and other equipment free of defect or excessive wear?

Are all employees who may be exposed to fall hazards properly trained in the use of fall arrest equipment? Are records available showing full annual inspections of all fall protection equipment, performed by a designated competent person? Are buckles and connectors free of damage or wear including corrosion, warping, cracking, etc.

Are resources in place to promptly rescue and recover any employee who falls? Are anchorages placed such that in the case of a fall lifelines or lanyards will not drag across the edge of H-beams, I-beams or other objects which may reduce the strength of the fall arrest system?

Floor and Wall Openings. Are all tools in good working condition? Do any hand tools, such as chisels, punches, etc. Do any hammers, axes or similar equipment have broken or fractured handles?

Are any wrenches worn or bent? Do all filed have appropriate handles? Are all floor jacks in good operating condition? Are tool handles wedged tightly in the heads of all tools? Are all tool cutting edges sharp so that the tool will move smoothly without binding or skipping?

Are tools that are not in use stored in dry, secure locations? Are eyewash fountains and safety showers provided and in working order where corrosive chemicals are handled? Are chemical containers labeled properly? Is proper PPE available when necessary to handle chemicals? Are flammable and toxic chemicals properly stored in closed containers when not in use?

Are chemical piping systems clearly marked as to content? Are adequate means readily available for containing spills or overflows properly and safely? Are respirators, if needed, stored Carpentry Shop Safety Checklist App in a convenient, clean and sanitary location? If respirators are used, are all employees properly trained on their usage and limitations?

Are hazardous substances handled only in properly designed and exhausted locations? Is there a list of hazardous substances that are used in your workplace? Is the written hazard communication plan up to date?

Are all Material Safety Data Sheets up to date and readily available? Are all containers of hazardous substances labeled properly with the product identity and any applicable hazard warnings? Is the master list of chemicals used up to date? Are flammable liquids grounded while in storage? Are flammable liquids grounded and bonded during transfer? Is secondary containment e. Is a first aid kit available and adequately stocked?

Are all exits clearly marked, unlocked and free of obstruction? Are work areas properly illuminated? Are spray painting operations, if present, done in spray rooms or booths equipped with proper exhaust systems? Are noise levels in work areas within acceptable levels? Are caution labels and signs used to warn of hazardous substances and biohazards?

Are grinders, saws and other machines that produce respirable dust vented to an industrial collector or central exhaust system? Are water outlets not suitable for drinking clearly identified as such? Is there safe clearance for equipment through all aisles and doorways? Are aisles properly marked and kept clear?

Are hand trucks maintained in safe operating condition? Are shelves secured and constructed to withstand the maximum designated storage weight? Are shelves secured to prevent tipping or falling? Are floors free of clutter that might cause slips, trips and falls?

Are signs used to identify slippery floors when wet or during clean-up? Do stairs have handrails that are in good condition?

Are non-slip feet intact on each ladder? Are ladder rungs and steps free from grease and oil? Do any ladders have broken or missing steps, rungs, or cleats, broken side rails, or other faulty equipment? Are metal ladders legibly marked with signs cautioning against using them around electrical power sources?

Are rungs of ladders uniformly spaced at 12", center to center? Are all equipment control valve handles provided with a means of lockout? Do appropriate employees have individually keyed safety locks? Are all machines being service properly locked out to prevent accidental usage?

Machine guarding. Is all machinery and equipment clean and properly maintained? Is sufficient clearance provided around and between machines to allow for safe operations, servicing, material handling and waste removal? Is equipment and machinery securely placed and anchored, when necessary, to prevent tipping or other movement that could result in personal injury?

Is the power shut-off switch within reach of the operator's position at each machine? Can electric power to each machine be locked-out for maintenance, repair or security? Are non current carrying metal parts of electrically operated machines bonded and grounded?

Are foot-operated switches guarded or arranged to prevent accidental actuation by personnel or falling objects? Are manually operated valves and switches controlling the operation of equipment and machines clearly identified and readily accessible? Are all emergency stop buttons brightly colored or placarded? Are all pulleys and belts that are within 7' of the floor or working level properly guarded?

Are all moving chains and gears properly guarded? Are splash guards mounted on machines that use coolant to prevent coolant from reaching the employees?

Are methods provided to protect the operator and other employees in the machine areas from hazards created at the point of operation, nip points, rotating parts, flying chips and spakes? Are machinery guards secure and arranged so they do not offer a hazard when in use?

If special hand tools are used for placing and removing material, do they protect the operator's hands? Are revolving drums, barrels and containers guarded by an enclosure that Carpentry Shop Safety Rules China is interlocked with the drive mechanism so that revolution cannot occur unless the guard enclosures are in place? Do arbors and mandrels have firm and secure bearings and are they free from play? Are provisions made to prevent machines from automatically starting when power is restored after a power failure or shutdown?

Are machines constructed so as to be free from excessive vibration when the largest sized tool is mounted and run at full speed? If machinery is cleaned with compressed air, is air pressure control and PPE, or other safeguards, utilized to protect operators and other workers from eye and body injury?

Are saws used for ripping equipped with anti-kickback devices and spreaders? Are radial arm saws so arranged that the cutting head will gently return to the back of the table when released? Are lint traps and guards in place on all dryers?

Material handling. Do employees carry loads in excess of 50 lbs by hand? Are mechanical means provided to carry heavy or awkward loads safely? Are aisles and pathways clear of debris and clearly marked? Are all aisles, passageways and doorways clean and clear of obstruction? Are chairs, benches and other seating surfaces clean, in good condition and lacking undue signs of wear or fatigue? Are adjustable chairs provided for employees that spend significant time seated?

Is sufficient lighting provided in all work areas? Are monitors positioned comfortably, with employee eye level near the top of each screen?

Are cords arranged such that they do not cause a tripping hazard to employees? Are office supplies stored such that they are easily accessible without undue employee strain? Are floor coverings in good condition, free of slip or trip hazards?

Action dequired. Are portable electrical tools and equipment grounded or have double insulation? Are grinders, saws and similar equipment provided with appropriate, properly installed safety guards? Are inspection dates marked on all power tools and cords? Do portable circular saws have guards above and below the base shoe?

Are any circular saw guards wedged up in a fashion that leaves the lower portion of the blade unguarded? Are rotating or moving parts of equipment guarded to prevent physical contact? Are effective guards in place over belts, pulley, chains and sprockets? Do pneumatic or hydraulic hoses on power-operated tools show signs of deterioration or damage? Are tools needing repair tagged with a "Do Not Use" sign?

Do employees avoid wearing loose clothes, jewelry or gloves that can get caught in machinery? Are all electrical cords intact not frayed? Do all electrical cords have intact grounding prongs? And don't do anything with power tools if you're tired, angry, anxious, or in a hurry. Keep your work area uncluttered, swept, and well lighted. The work space around equipment must be adequate to safely perform the job you're going to do. Don't wear loose clothing, work gloves, neck ties, rings, bracelets, or wristwatches.

They can become entangled with moving parts. Tie back long hair or wear a cap. Be sure that any blade or cutter you're going to use is clean and sharp so it will cut freely without being forced. Guards -- and anti-kickback devices -- also must work. Check to see that they're in good condition and in position before operating the equipment. Don't use tools with signs of power-cord damage; replace them. Only work with an extension cord that's the proper size for the job see chart, below , and route it so it won't be underfoot.

Tools other than double-insulated ones come with three-wire grounding systems that must be plugged into three-hole, grounded receptacles. Never remove the grounding prong from the plug. Around cutting tools, always wear safety glasses, goggles, or a face shield.

Add a dust mask when sanding. Wear hearing protection when required. If you can't hear someone from 3' away, the machine is too loud and hearing damage may occur. Check that all chuck keys, adjusting wrenches, and other small tools have been removed from the machine so they won't interfere with the operation. Inspect the wood you're going to use for nails, loose knots, and other materials.

They can be hidden "bombs" that possibly may injure you or damage your equipment. Keep a pushstick or pushblock within reach before beginning any cut or machining operation. And avoid getting into awkward stances where a sudden slip could cause a hand to move into the blade or cutter. When I find a woodworking plan I like well enough to graduate it to the workshop, I laminate a Skip to main content.



Kreg Hole Spacing Difference
Diy Epoxy Resin Wood Projects 62
Thick Veneer Sheets Guide