25.03.2021  Author: admin   Home Woodworking Projects
I have wide pine baseboards currently, that are going to be ruined do it yourself wood flooring home depot canada I dp them out. Have u any suggestions to prevent the gapping between boards other than acclimate the wood? To canadaa minimize this I would have glued them down as well as nailed them down, I think that would have helped a lot when it came to their movement depending on the humidity etc. The moisture has nothing to do with the problem. We know thousands will be determined to dive into installing hardwood floors themselves, but do they think about the grueling work ahead of them? Whats great Is I can do 1 room at a time. Then you could lay the wood floor over that using brads and glue.

Oh well, when it gets beat up enough, we'll just call it distressed or hand-scraped. So Hard, nothing damages or dents it. I wish I paid the bit of extra money and went with this on my recent project. If I get tired of the bamboo and the dents, maybe I'll just nail oak planks on top of it, but I don't know how well it would hold the nails. Find all posts by DallasGC. Thanks for the photos.

The flooring is beautiful, and makes me more excited to use the product myself. On your white baseboards - did you rip out the old and replace them with the wide boards after the floor was laid? I have wide pine baseboards currently, that are going to be ruined if I rip them out.

I am thinking of laying the flooring, leaving the current moulding in place and covering the gap with the bamboo quarter rounds. Find all posts by katallen. I not sure if your familiar with the home legend bamboo flooring home depot. It is not the engineered click that would be easier to install. It is the simple tongue and groove style.

I just level my floors. I wanna float this bamboo if possible but many have said that i can't, what is your opinion on this.

Find all posts by forsport. This floor is not a floating floor. You need to glue it or nail it. It's a good floor though.

Find all posts by HotxxxxxxxOKC. No one has addressed the issue of what to seal this flooring with. Someone mentioned it but no one has given any advice. I installed bamboo from Roy's Flooring by hand no guns and it looks great. The problem is that it has show itself to scratch fairly easily. I put down about sqf of this stuff in 4 rooms and I would hate to think that I spent a week by myself laying this stuff down just to find out that you can't seal it. I have my suspicions that nothing will stick to the carbonized finish well enough to "seal" it.

Any thoughts or advice on this would save me many headaches. Find all posts by blill We purchased the product for approx. We had looked at several other options and decided on this product, as the sales person demonstrated, it was the most scratch-resistant of their bamboo floorings.

Note: We were never advised of the following problems with this product, had we been warned, we never would have made this purchase Our contractor did install the flooring according to Legends specific instructions for our slab foundation.

I will say, it did look beautiful for a couple of weeks! Two weeks after installation our flooring popped, warped and scalloped, now has to be completely taken out and another product put in it's place. Our temp. The bottom line is, the Home Depot Sales Dept. When the Department Manager found out of our experience with their product his comment to us was "Gee, I wish you had come to me when purchasing, I never would have sold you this product" Home Depot accepts no responsibility?!

Do you think I will ever purchase another item from Home Depot knowing they had prior knowledge of a problem with this product, yet they decided to put it back on the floor for the all mighty dollar and to hell with the customer? But that's another story so, be warned this product cannot be trusted to deliver consistent, reliable results, it is not worth the hassle and I would highly discourage installing an inferior product such as Legends Bamboo Flooring.

Upon further investigating bamboo flooring products made in China, I have learned there are several quality issues with this product i.

In doing so will not allow the bamboo to reach the minimum mature age needed to maintain the integrity of the product. I have also found, in the rush to supply the market other steps are grossly mis-managed such as insuring proper drying time, complete application of the sealer. Now think of this before your purchase; How many stores does Home Depot have?

How much of this product do they have to have to be able to supply all of their stores? Exactly, and we all know from experience exactly what quality we are getting here, the motto seems to be, when in doubt, ship it! I would not recommend Legends Bamboo Flooring, do your research there are other good companies that take pride in the quality of their Bamboo Flooring, this company has serious quality control issues. I would agree about the Home Legend bamboo flooring. We took a sample home and it dented like nothing.

Has anyone had experience installing this or their similar lines. Also any idea who Home Legends manufacturer is. Find all posts by rzsionak. I looks beautiful.

But we havent moved in yet Im worried about the scratches we have already got from just moving in and working around the house. I want to put another clear coat on the floor. CAn i just put another coat on top of the floor now that its installed? Find all posts by GHRiggs. Don't like bamboo flooring at all. It dents so easily, I hated my Bamboo flooring.

I do not this this kind of flooring is livable. Find all posts by ckovac. DIY Bamboo. Find all posts by DIY Bamboo. Hi, I purchased sq ft of Home Legends Bamboo click lock flooring and installed it in my home. I hired a flooring expert with 38 years experience in the field of flooring.

He had not had an experience with this type of flooring. We are having a major problem with the end joints tongue and groove staying together. I filed a complaint with Home Depot and the vendor, and they are sending a flooring inspector to my home on Wednesday of next week. Other than that, the flooring scratches easily, and varies greatly in color. I special ordered a stairnose, and it was a complete different color dark, dark brown.

When I stripped the finish to re-do it, it was a dark red stain. Very odd. It is made in China. I will post again after the inspection. I would not recommend this flooring to anyone. It moves to much while installing. It is a floating floor, and it sits on a slippery surface 3 in 1 underlayment sold by Home Depot. I can only guess that Home Depot will not take any blame for this problem. Find all posts by rosendm. Their floating bamboo is on the low end of quality.

Bamboo Toast by Home Ledgends. After complaining to Home Depot an independent inspector came to my house and took readings, etc. The vendors answer was they are denying my claim. They blamed the problem on excess moisture in the concrete floor. The moisture has nothing to do with the problem. The end joints in the planks are coming apart from walking on it. The floor is floating on 3 in 1 underlayment sold by home depot. The tongue and groove end joints to not lock, and the underlayment is slick, so when you walk on it, the ends open up.

They will have to be glued, which means I have to take it all apart and start over. The factory said it would be okay to glue it, but they accept no blame.. Home Deport will probably eat some of the cost, but I don't know how much yet. The whole problem is the engineering of the planks.

The end joints need to lock in when joined together. Simple as that. Do not use this flooring unless you have an underlayment that the boards will not slide on. And I would recommend gluing the ends not the sides. I will post again if Home Depot gives me any reimbursment for my aggrevation. Originally Posted by rosendm. Find all posts by Beerescuer. What was the moisture reading results?

If it's not high enough for a total no-no, then there are certain things that needs to be done to prevent moisture penetration. I've worked for HD flooring and we would not eat any cost for a floor that was not installed per manufacturers instructions.

Instructions say to perform a moisture reading. Originally Posted by Beerescuer. Mike, do you have an update as to what happened after Home Depot came out to inspect your floor?

We also live in Hawaii, and had bought the same flooring, but haven't installed it yet someone suggested we open up the boxes and plastic for weeks! They measured the moisture on an exposed concrete floor when the temperature in the house was 75 degrees.

They said it was 8. The factory is recommeding another moisture barrier on top of the first one, and that we glue the ends. That is unless you prefer that look. Anything goes with random plank, but you'll notice there aren't many that offer the flexibility we do. See more on random width plank and how to figure the formula in what you need.

Across many pages on the site you will notice I do not recommend gluedown installations for folks wanting to do the work themselves. Consider a professional with the experience on this one. There's a lot of hands and knees work. Gluedowns can also get extremely messy with some of the adhesives being used today. Consider it this way.

When urethane based adhesives first came into play in the mid 90's my first job was a mess Thank goodness it wasn't a prefinished floor! It was a specialty unfinished gluedown that would be sanded and finished once the installation was completed. The sanding machines took care of the excess glue, but I got a lot of heat from the finishers.

Having been more familiar with the other adhesives which are now banned by the EPA that weren't as gooey, I had the stuff everywhere and considered myself a pretty clean worker. At that time, few if any of us, knew how difficult urethane adhesives were to remove once cured on the surface of the floor. Often a warning comes with these types, clearly visible on the top of each container.

With prefinished wood flooirng that is not thoroughly cleaned at the end of each day, the cleanup chore can be another nightmare. I've even heard of a few cases where cleanup was next to impossible. Replacement of the brand new floor was the only option. Expect aching knees and fingers with gluedowns. Once again, if the product is not milled well, you're likely to be fighting it all day long. Hence the reason for sore fingers trying to pull the planks together.

We have many tips on keeping that installation tight on our gluedown tips pages. It is as simple as it sounds! I really don't think it can get any easier. The lock and fold idea simply goes as easy as placing a board on the subfloor, grabbing another piece, engage the tongue and groove and move to the next board. The locking takes place when additional boards are in reality folded over the other. Floating floor glued types will require more time than lock and fold if they're wide plank.

You'll be on your hands and knees all day long and always reaching in dozens of different positions for that hammer and tapping block. With a glued type floating floor you'll probably do just as I do and leave the glue bottle and cleanup rag more than an arms reach away. Good exercise yes, but this type goes much quicker than naildowns or direct gluedowns.

At one time manufacturers rarely had products under seven inches in width designated for floating. The DIY explosion and competition seemingly forced many into allowing more common three and five inch boards to be installed via the glue and tap method. Why the sudden switch when these same products would not be warranted previously with the glue method is beyond anyone's guess.

Now that many common three inch wide engineered planks can be floated, time involved will increase dramatically opposed to the wide Do It Yourself Wood Flooring Home Depot Job plank.

The fundamental reason is you'll be dealing with random sized lengths, and in some cases product lines that have many shorter pieces. Older style floating types are still around but often utilize much longer set lengths; some up to 96 inches.

We respect your privacy. All email addresses you provide will be used just for sending this story. But when you consider all the flooring options on the market, it can be tough to know which material to go with. How much traffic will the space have? If you need help thinking through the functional aspects of flooring, check out our buying guide to find the best types for each room.

We test wear resistance by subjecting a 6-byinch sample of each flooring material to an abrasion machine fitted with a fine sandpaper disc, assessing each sample for signs of visible wear after each cycle of sanding.

Our testers drop the weights from progressively higher points, examining the flooring for visible denting after each drop.

We evaluate the potential for fading by exposing part of a sample of flooring to UV rays for two weeks straight, and then compare the exposed portion to an unexposed portion. This gives us information on what can happen to a section of flooring that gets more sunlight than the rest of a room over time. That depends on whether the material can be installed as a floating floor or whether it should be nailed or glued into place.

With a floating floor, the pieces click together to create one large puzzle that can be installed right over an existing floor assuming it's flat and smooth. The weight of the material will keep it from shifting, and the walls will hold it in place.

We indicate which flooring can float in our extensive ratings. Wood is either nailed or glued, and tile is set in a bed of mortar. Prices listed for each type below are per square foot. This flooring consists of factory-finished planks and is available in a variety of wood species.

It can survive more scuffs than unfinished hardwood, and adds warmth and character design-wise. Many earned Poor ratings in CR's tests. Made from several layers of plywood bound together by adhesives and topped with a layer of solid wood, this floor type simulates the look and feel of hardwood, with one important advantage: The plywood substrate makes each plank less susceptible to seasonal shrinking and swelling than solid wood.

That additional stability minimizes gaps between boards that can appear in dry conditions. There's no runner-up in this category because none of the other products tested well enough for CR to recommend.



What Is Carpentry Shop Definition Site
Woodworking Knife Uk 50
Woodcrafters Supply Zeros
Youtube Wood Work Bench Code