18.03.2021  Author: admin   Diy Wood Projects To Sell
Jennifer DohertyJanuary 13, at pm :. Hi Karen, Shilo is the only cabinet line not reviewed well by us due to finlshes insufficient hanging rail. I can not find one good review. Are Wellborn cabinets a good choice? Sorry I should have mentioned the Homecrest are fully upgraded all plywood. Hi Teri, I have never heard of using inset cabinetry on upper cabinets and general finishes wood stain reviews site cabinets below.

It appears you like Wolf a little better than Waypoint. Hi Pam, Since the Duracraft finish is new I know very little about it. Your designer may have insights. However all painted finishes chip easily and get damaged by water easily so if you are thinking that the Duracraft finish would prevent this that will not be the case.

So there is probably a safety net if you beat up the white cabinetry whichever finish you choose. I about to commit to a full kitchen remodel with white shaker full overlay maple Kraftmaid Vantage cabinets from a dealer.

What is your opinion of the durability of these finishes and which is the better choice. Thank you so much! Not Acrylic doors. Those will be incredibly expensive. Laminate doors would be the compromise that would get you close to the look but be durable and not overly expensive.

There will be many frameless cabinet lines that will come with a plywood or plywood core upgrade and not be overly expensive. We sell several for example Bishop or Fabuwood but there are many. Oh dear — now I may be back to the drawing board! What brands do you recommend that have solid plywood construction and a laminate or acrylic high gloss finish?

Hi Laura, I think all the cabinetry you are considering may be European Frameless cabinetry with thermafoil hi gloss doors. You have to be very careful as the cabinetry in this style will probably be particleboard and not durably constructed. Thermafoil is also sensitive to heat and will melt if an oven seal leaks or your design puts cabinetry too close to gas burners. Use heat shields on either side of a range to reduce the risk.

I would not use professional cooktops in a thermafoil kitchen. Foil cabinetry tends to delaminate after about 20 years so your kitchen has a predetermined expiration date. The high gloss sleek contemporary style kitchen you like could be done more safely with a laminate door without these issues. A high gloss laminate instead of a foil would not delaminate and would not be overly sensitive to heat but it might not be exactly the look you are going for.

Your ceiling will also have to be perfectly level for it to work. The reason we are considering this is because we would like to get as much storage as possible but still have a nice crown molding. The finish on Fabuwood is more consistent. Interesting question though. A year from now I wonder if that will be the case?

Since you sell both brands, I am very interested in your opinion. For the same price, which do you choose and why:. Hi Josh, While cabinet lines like Homecrest are still pretty well built, construction wise, even without all plywood construction, all the exposed sides on your cabinets must be plywood or else they will be plastic and fade over time and look terrible. Wall cabinets that are on ends or will hold lots of plates or are not connected to cabinetry on both sides also need to be plywood to not fall apart due to added stress.

Once you make these cabinets plywood you are more that halfway to all plywood. Also the all plywood upgrade is usually discounted and comes with upgraded drawers and hinges. What is your opinion on the 3 levels of homecrest cabinets… I know the solid plywood are the best, but will the others hold up? Thank you for the information about the Wolf and Aspect cabinet. It is greatly appreciated!

I have one more question have you ever heard about Mantra cabinets they are out of MasterBrand…thoughts? Seem to be equivalent to Wolf but come with soft closing doors etc with no upgrade. I have a question. We are building a new modest house and are looking at Wolf Classic cabinets. We are waiting on pricing from the designer. My wife wold like to upgrade to get the color she prefers and the soft close drawers etc.

The designer recommended Aspect cabinetry to us if we were thinking of upgrading the cabinets to the higher end WOLF…what makes me nervous is the Aspect definitely has way nicer finishes as the designer pointed out, but The frame is not made of plywood… she said that the ASPECT should hold up better, but that goes against everything I have learned because you want a plywood frame correct?..

Hi Lynn, Belmont appears to be a frameless line and so one that we would only recommend for a contemporary slab door style. In a frameless line I would worry about getting the lesser line over the Often these type designers only care about color and style and take less care in making sure their designs are safe, durable, and well constructed.

Thanks for all the good info. I anxiously await the ratings. My designer is showing me Bellmont series which is not listed on the list. Possibly because I know the line better. Hi, Would like to hear your opinion of Koch Cabinets. Hi KJPS, Sorry, This is just one of the many reasons it is a terrible idea to have kitchen cabinetry made by a small cabinet maker.

Not only is the product nearly always less durable and less consistent with all kinds of potential design and construction issues, but as you have found out you have no effective warranty. Stop trying to continue on the misguided path you started on. Just start from scratch with a named brand cabinet line and find a good kitchen designer to work with. You almost certainly have kitchen design problems since no good kitchen designer would work with a small carpentry shop.

Hi Josh, My question is a little different that what others have posted. Hired a custom cabinet company in our area Michigan. We have choosen stained select cherry. I am seeking an unfinished materials so we can have it custom stained to match the existing. We will be moving from the home in approximately 5 years. Any advice on how to get the materials to finish our project? The kitchen companies we have contacted will not finish the project unless we do a total tear out and start all over.

However that fact that I have never heard the brand name, that the Arti Craft website appears broken, and that seems to be the only dealer that carries Arti Craft is troublesome. Not enough information to really help you. Hi Shruti, Reviews are not reliable because all cabinet lines get bad reviews.

The only cabinet line that gets good reviews is terrible and is of course IKEA. Read why here. Both Fabuwood and Wolf are well constructed in there better lines. They are not know for beautiful stains though. They have a few nice stained finishes such as grays, buy cherry and maple type finishes look better on those woods in a higher grade of wood.

It is just a matter of looks though General Finishes Gray Wood Stain Loop and if you like the stained finish you should be fine. Thank you for this excellent forum! We are looking to renovate the kitchen and I like stained cabinets much more than painted ones. I am considering fabuwood vs. Which of these two will you recommend? Are there any other cabinet lines in the same range, that provide good stained cabinets?

The designer is more important that the cabinet line. But again I would only buy it if the dealer is local and a designer is available to work with. Thanks again for maintaining this long running blog full of useful information.

I am looking for a lower end, well built cabinet. Based on your reviews and blog responses, I have narrowed it down to the following and would like to ask for your analysis. All designs equal, and I will consider sending a design on Friday before my final decision, I have gotten quotes for the following:. This can happen with all painted solid wood cabinetry.

The dealer is requesting this and not Brighton. It would actually be slightly less noticeable on Brighton then the other lines because Brighton sands the seams to a higher degree than Kraftmaid or Thomasville. Hi Paul, I was looking for cabinet for my bathroom. I was comparing Brighton, Kraftsmaid, and Thomasville. I am leaning toward Brighton. What concerns me is I am looking at a painted finish and Brighton is asking me to sign a waiver acknowledging that the seams might spread.

Is this normal? Do the seam on painted finished spread to the point where it is that noticeable? Do other manufacturers require a waiver? Hi Shawn, This is where the design becomes so important — when you sell a home.

Spending money on cabinetry, countertop, and appliance splurges has little resale value. While removing a wall or moving a doorway could change the entire layout of your home and make it much more sell-able. Researching to find the best designer to work with is where you should start. Hi Paul — This is truly a great site and resource.

We will be renovating our kitchen but we may end up selling the house in the next couple of years. If we were staying we would invest in inset cabinets. The reason we like inset is the tight gaps. The other lines like Omega and Crystal have several different types of construction so it is hard to know what you are being quoted. Maybe Chris can figure out exactly which version of each line you got quotes on.

Thanks so much Paul — I will email Chris now and will definitely call tomorrow. I am definitely open to suggestions in this corner, and luckily the island can move around since we have one room — but few walls. Looking forward to speaking with Chris, and thank you again for your help!

Dewils is another good brand like the ones above. The one red flag that I get from your post is that your concern about accessing every bit of space is a concern that often drives homeowners to overcrowd their kitchens. You might want to send us your design to look to get an unbiased opinion. We give free advice outside our service area on Fridays between pm EST. You can call Chris this Friday, he is extension 8. First off — thanks so much for all the useful information in here and in this blog!

We love the modern look, so we really like the frameless options and are open to framed with slab overlay doors. Only the Crystal estimate includes custom cabinets, the others have dead space. What would you recommend? How does Dewils compare, especially if it is slighter higher than these quotes? Most of the bad reviews all cabinet companies receive both well constructed lines and poorly made lines can be traced to customers misunderstanding what they bought, mistakes by the kitchen designer or cabinet dealers, or poor installation by the contractor.

Hi Wailana, I believe we were able to get specifications on Belmont cabinetry in the past and commented on them. Shaker or recessed or raised panel door style are better done in framed cabinetry.

Do you have any ratings or experience with Bellmont Cabinetry, specifically the series, frameless, Alder wood? Thank you, Wailana. It is generally more expensive. It sounds like the dealer selling the Fabuwood is marking cabinetry up a great deal while the dealer selling HomeCrest is being very competative.

I would definitely pick Homecrest over Fabuwood for any stained cabinet and as far as a painted cabinet is concerned you might notice that the paint on the HomeCrest is not as smooth as the Fabuwood paint job because the wood is Maple instead of Birch and more difficult to sand. Assuming all things being equal. Hi Nancy, My input would be to not listen to any other advice from the person that recommended Merillat.

If this was a home owner it can be forgiven as simply not knowing what they are talking about. If this was a contractor it is telling for several reasons and I would not use them for my renovation. Hi Merillat cabinets were recommended to me. I can not find one good review. Can you offer your input? Thank You. Hi Nadine, Thanks and a very savvy question. While no one can really know what will happen when ACProducts Inc takes over Kraftmaid I will say that ACP has been a good steward of the other lines they have acquired.

In fact Yorktowne went from a pretty crummy cabinet line to a well constructed one after ACP took over. Tough to give advice without a crystal ball but I would fall back on selecting the best designer and cabinet dealer to work with. If the same designer sells both lines than ask them their opinion. If it is two different companies than goole both dealers and work with the designer and dealer with the best reputation.

I am so impressed with your advice. We are adding on a kitchen area to a very old house. Considering Kraftmaid or Wellborn solid construction cherry with a raised panel for cabinets.. Frankly I am lost. The Kraftmaid cabinets are nice but now that company has been sold. Are Wellborn cabinets a good choice? This is a family home and I will probably live here forever. I need a reliable , traditional choice.

Any advice is appreciated. Hi Paul — This website is super helpful. Hi Mike Great questions! As far as inexpensive cabinet lines go we like many but know the lines I list below best.

You have to General Finishes Wood Stain Near Me With be careful with the inexpensive lines to make sure that they are assembled in the factory, and that the dealer has a good reputation, and be aware that there could be more damage during deliveries as these lines use less expensive carriers.

Of course damages get replaced by any good dealer. Generally drawers are better than roll outs and cost exactly the same. If a kitchen is big enough and price is not a concern, we usually still leave one cabinet with no interior convenience like roll ours or Lazy Susans for awkward to store items like Woks, Blenders, etc. And we include one cabinet with adjustable roll outs for items with unusual heights. The smaller the kitchen the more saving storage space is a premium. I know you recommend Fabuwood a lot.

The cabinet dealer we initially went to did not carry Fabuwood, but other cabinet dealers in our area do carry them. Also, do you have any recommendations on where in a kitchen if at all to include lower cabinet doors with pullout shelves instead of lower cabinet drawers? A large space would usually call for a more sophisticated design and a larger spec book than the very inexpensive lines would offer.

The most inexpensive cabinetry like the Carolina Heartland cabinetry can still last a lifetime if it well built as you say.

However I can see from the web site that the cabinetry finish looks cheap. The photos on the Carolina Heartland website and their website itself is so amateurish that I find it troubling. While they look close in quality we only recommend using them on homes that are to be flipped. If a cabinet companies web site does not look as nice as a small contractors that should be a red flag.

Your warranty and the likely hood that the line will even exist in a short time make buying cabinetry from them riskey. Always Google the cabinet dealer too. They are who you are actually buying cabinets from and if they have poor reviews or no reviews then I would not buy from them. Hi Paul. Thanks for all the advice you provide on this blog — its incredibly helpful!. You do not rate Carolina Heartwood but they seem to have many, if not all, of the construction specifications you recommend.

What are your thoughts on this brand? Buy it assembled by the factory but also work with a good kitchen designer on your kitchen. It depends on the door style and finish you are looking for but Fabuwood has the nicest painted white shaker and recessed panel doors for a similar price. One of the most frustrating things for good kitchen designers is how delusional the public is becoming about needing help designing their kitchens. HGTV, design software, and the the amount of information people can gather online from websites like ours has made the public ridiculously over confident.

As kitchen designers we know that a little bit of knowledge is especially disastrous in our profession. Experienced kitchen design professionals will tell you that the worst designs we see are from architects, contractors, engineers, and real estate professionals that arrogantly believe they know enough to design a kitchen, and need no help from an actual kitchen design professional.

Unfortunately the general public is falling into the same over confident delusion due to the easy access of simplified kitchen related information. IE a knowledgeable, experienced, and talented kitchen designer to work with. With the help of a good kitchen designer you can make the sensible choices in design and materials that add value to your home.

Without professional help you project will almost certainly look great and make total sense TO YOU but in reality be a terrible substitute from what you could have had were you to get the help everyone needs. I know Starmark better so it is hard to compare.

But the framed Holiday cabinetry spec book impressed us. I would think both lines were similar. No I have never heard of these lines which is pretty hard to accomplish and not a good sign.

Looks like they are from a small carpenter with a broken website. Truly appreciate the time and effort to maintain this information! A compliment before a favor! In general what is your opinion of Holiday kitchens and how do they compare with a line like Starmark. Thank you! Hi Josh, Thanks for the kind words. We plan on reviewing over cabinet lines.

We are also formatting the old reviews to make them easier to read and more attractive. Happy Holidays too! I have read your blogs which are chocked full of valuable information.

Almost a year and a half has passed since the list was updated. Do you have an updated listing for ? Hi Peter, We get lots of these kind of comments. Our answer is always the same — we will not be forced to rubber stamp bad decisions. We would never sell either of your choices to one of our customers and were a family member of mine to consider your choices I would yell at them. There are an almost infinite number of sensible cabinet choices out there.

And if my contractor recommended them, I would get some other input, as well as estimates, from other contractors. What is the difference between a stain and a dye? Stains and dyes are used to color a wood before applying a clear topcoat. The difference between a stain and a dye lies in the size of the particles used to create the color….

Pigments are rather large and are suspended in a solvent when stirred. Dyes, however, are made from extremely fine crystals that dissolve completely in a solvent and stay suspended in the solution. Stains will enhance the grain pattern in wood because the large pigments will settle into the pores of the grain.

This is very evident in woods like oak or ash which have very large grain structures but less obvious in woods like maple and cherry. Dyes on the other hand will color wood uniformly because the dyes penetrate both the grain and surrounding areas equally. How do you tell the difference if you can't read the label on the can? Gently open the can without shaking it and lower a stirring stick to the bottom of the can. Stir well before using. If the stick comes out clean but uniformly colored then it is a dye.

I have found that General Finishes oil based wood stains provide a deep rich color that penetrates into the pores of the wood. It is an easy wipe on, wipe off stain that dries slow enough for easy application. I have used the oil based wood stain under both solvent and water based finishes with equally good results.

The first thing you notice about General Finishes water based stains is the amount of solids in the can. When used directly out of the can without a lot of stirring it acts like a gel-stain; the thick consistency slows down the penetration into the open pores of the grain which gives the user much more control of the application of the stain to the surface.

However, a veryinteresting feature of the product is that by stirring it the gel-structure will break down and it will become a smooth, creamy stain that can be easily wiped on and off. General Finishes has a product that they call a water based dye stain. I believe the term "dye stain" is a purely marketing term because people are familiar with General Finishes Wood Stain Reviews App stains, recognize the term, and are unsure about what to do with a dye.

In practice, however, this is a dye…and I like dyes! They can be sprayed either as a light no-wipe application or to quickly saturate a surface and then wiped off.

Dremel Wood Carving Machine Off
Shingle Splitters Point Lake Macquarie Kit