How Much Does A Complete Water Filtration System Cost?

Safe, good‑tasting water does not have to be a luxury in Peoria, AZ. Hard water, chlorine taste, and desert minerals are normal on municipal lines and even more pronounced on many private wells. A complete water filtration system removes the guesswork and the constant buying of bottled water. Still, homeowners want clear price ranges before scheduling a system. This article breaks down real‑world costs for water filtration system installation in Peoria, explains what drives the price up or down, and shares practical examples from local homes.

What counts as a “complete” water filtration system

A complete setup usually means whole‑home water treatment, plus point‑of‑use drinking water filtration at the kitchen sink. In Peoria, that often looks like a whole‑house carbon filter to reduce chlorine and taste, a water softener for hardness, and an under‑sink reverse osmosis (RO) unit for clean drinking and cooking water. Some homes add UV disinfection for well water or a more advanced media filter to address PFAS or nitrates when tests call for it.

This combination covers showers, laundry, appliances, and the family drinking supply. It also protects water heaters and fixtures from scale, which matters in areas with high grains per gallon.

Typical price ranges in Peoria, AZ

Pricing is driven by water chemistry, flow rate needs, and equipment quality. For most single‑family homes in Peoria, homeowners can expect the following installed ranges:

• Whole‑house carbon filtration: $900 to $2,200 installed. This covers a basic backwashing carbon tank sized for a 1 to 3 bath home, plumbing tie‑ins, and bypass.
• Salt‑based water softener: $1,300 to $3,200 installed. Larger homes or high‑efficiency twin‑tank systems fall on the higher end.
• Under‑sink RO drinking water system: $650 to $1,400 installed. Add $200 to $400 if an icemaker or fridge line needs to be run.
• UV disinfection (when needed): $900 to $1,800 installed. Mostly for private wells or homes with recurring bacteria issues.
• Advanced media for PFAS, nitrates, or arsenic: $1,800 to $4,500 installed, depending on media and flow demand.

A full package with whole‑house carbon plus softener plus RO commonly lands between $2,800 and $5,800 installed in Peoria. Add UV or specialty media and the range can reach $6,000 to $8,000. Very large homes, casitas on shared lines, or high‑end stainless systems can exceed that.

These figures reflect professional installation, code‑compliant materials, and startup calibration. They do not include unusual site work such as trenching 60 feet to a detached garage or replacing a collapsed main shutoff.

What drives the cost up or down

Water chemistry sets the baseline. Hardness levels above 15 grains per gallon push a system toward higher capacity softeners. High chlorine, chloramine, or heavy sediment can change the carbon Go to this site media type and tank size. On wells, iron, manganese, and sulfur require pretreatment before softening or RO.

Home size matters. A three‑bath ranch in Vistancia has different flow demands than a five‑bath two‑story near Fletcher Heights. Flow rate should match peak household use so showers do not lose pressure when the dishwasher runs.

Plumbing access changes labor time. A garage with a clear wall and existing loop is the easiest install in Peoria. A tight side yard with a block wall, no loop, and long runs to the kitchen costs more. Retrofits inside finished walls add drywall and patch work.

Quality of components also plays a role. NSF‑certified valves, American‑made resin, high‑grade catalytic carbon, and larger RO membranes cost more upfront but tend to last longer with fewer service calls. Warranty coverage reflects that difference.

A quick look at Peoria’s water quirks

City water is safe, but it often arrives with noticeable chlorine taste and hardness. Hardness typically ranges from 10 to 18 grains per gallon in many neighborhoods. In contrast, private wells north of Happy Valley or west toward Sun City often show hardness over 20 grains per gallon and may include iron or sulfur.

Those facts matter for system sizing. A family of four in Westwing Mountain with 16 gpg hardness will be happier with a 48,000‑ to 64,000‑grain softener than a small unit that regenerates too often. That same family likely prefers a backwashing carbon unit over small cartridge filters, which clog quickly in Peoria sediment.

Upfront costs vs. ongoing costs

A realistic budget considers maintenance. Here are typical yearly ownership costs in Peoria:

• Water softener salt: $90 to $180 per year for most families. Homes with very hard water or high usage land higher. A bag of salt is usually $7 to $12, and most homes use one to two bags per month.
• Carbon media changes: $250 to $600 every 3 to 6 years for whole‑house backwashing carbon, depending on chlorine load and tank size. Some catalytic carbon beds last longer with regular backwash.
• RO filters: $90 to $200 per year for sediment and carbon stages. RO membranes usually last 2 to 4 years and run $120 to $250 when replaced.
• UV lamp: $100 to $180 annually. The quartz sleeve needs cleaning and occasional replacement.

Those costs are predictable. They also compare well to bottled water spending, which often runs $600 to $1,200 per year for a family buying cases at warehouse stores.

Example setups and real numbers

A two‑bath starter home near Parkridge: The owner wants better taste and less scale on fixtures. A 1.0 cubic foot backwashing carbon filter plus a 32,000‑grain softener and a basic RO with a dedicated faucet totals about $3,400 installed. Yearly maintenance averages $200 to $300.

A four‑bath home in Vistancia with a pool and outdoor kitchen: The family uses a lot of water and dislikes chlorine smell. The setup includes a 1.5 cubic foot catalytic carbon tank, a 64,000‑grain high‑efficiency softener, RO with a line to the fridge, and a hose bib bypass for plants. Price lands near $5,200 installed. Annual upkeep sits around $300 to $450, mostly salt and RO filters.

A well home on the far north edge with 24 gpg hardness and 1 ppm iron: The project starts with iron filtration, then a softener, plus UV and RO. The package runs $7,500 to $9,000 installed, driven by pretreatment and UV. Maintenance is higher, in the $350 to $600 per year range.

These examples are typical for water filtration system installation in Peoria and reflect common site conditions.

Whole‑house carbon vs. cartridge filters

Cartridge filters look cheaper but operate better as prefilters or point solutions. A single 10‑inch carbon cartridge may last a month or two on Peoria city water before pressure drop becomes an issue. A backwashing carbon tank flushes itself, restores flow, and holds a much larger media bed. Over 3 to 5 years, the tanked system often costs less to run and delivers cleaner water at every faucet.

Softener choices: salt‑based or “salt‑free”

Salt‑based softeners remove hardness ions and stop scale formation inside appliances. Dishes dry clearer. Water heaters run more efficiently. In contrast, most “salt‑free” systems condition scale but do not lower hardness. That means the feel of the water and the soap efficiency stay the same. Salt‑free systems may fit a home that only wants to reduce scale on glass and fixtures, but for families who want softer water for skin and laundry, a salt‑based system is the predictable choice.

In Peoria’s hardness range, salt‑based softeners are still the standard. The extra plumbing for a drain and 120V outlet is usually straightforward in a garage.

RO drinking water: is it worth it?

For homeowners who cook, make coffee, and fill bottles daily, an RO system is the difference maker. It removes dissolved solids that carbon alone does not catch. This is why it tastes closer to bottled water. The added install cost is modest compared to the convenience. Running a line to the fridge adds time but saves filter purchases on the fridge side and produces better ice.

Some ask about remineralization cartridges for taste. Many RO kits include them. In Peoria, a remineralizer often produces a more neutral taste that families prefer.

Permits, loops, and code items that affect price

Newer Peoria homes usually have a softener loop in the garage with a drain and a nearby outlet. That cuts labor time and keeps costs down. Older homes may lack a loop. Creating one means cutting into the main line, adding a bypass, and sometimes opening drywall. If the water heater is on the far side of the house, expect longer runs and extra hanger work.

Backflow prevention and air gaps matter. An RO drain must have an air gap to meet code. Some whole‑house systems require vacuum breakers or updated shutoffs. These parts are not expensive, but skipping them leads to problems later.

For outdoor installs, UV exposure and heat are serious in Peoria. Outdoor tanks need UV‑resistant jackets or shade. RO systems belong inside or in conditioned spaces. A pro weighs those details so equipment lasts.

Warranty and service considerations

A low price can hide weak support. Homeowners should ask about three things: part warranties, labor coverage, and local service response. Valve heads should have factory support for at least 5 years. Tanks often carry 10 years. Membranes and cartridges are consumables, but their replacement schedule should come with clear, upfront pricing.

A strong installer provides startup testing, water hardness verification, and programming specific to Peoria’s water. That includes setting regeneration schedules based on household size and actual hardness, not a guess. The first few weeks after installation are a good time to fine‑tune salt dosage and backwash times.

How to keep a system running well

Peoria’s dust and heat can creep into garages and outdoor areas. Simple habits avoid headaches: check salt levels monthly, keep salt dry and break up bridges with a broom handle if needed, and call for a service check if the softness changes or the RO output slows. Annual visits catch small leaks and worn seals early. Good systems run quietly; new noise near the valve or drain line deserves attention.

For well owners, annual water testing matters. Iron and bacteria levels shift seasonally. A quick test guides media changes and protects the RO membrane.

Signs the home needs more than a pitcher filter

Pitcher filters help with taste at one faucet, but they do not treat showers, laundry, or scale in water heaters. Homeowners in Peoria who see white spotting on fixtures, dry skin after showers, or frequent kettle scale will see real benefits from a softener plus carbon. If the coffee has a metallic or bitter edge, or the fridge water tastes flat even with new filters, RO solves it.

Families with new babies, immune‑compromised members, or private wells often want UV for added safety. This is not needed on most city water homes, but a water test tells the story.

Budgeting tips for Peoria homeowners

Most homes do well with a mid‑range carbon tank, a correctly sized salt softener, and an RO unit. Rather than oversizing everything, invest in good media and valves, then schedule routine service. Avoid single‑use gimmicks that claim to “magnetize” water. Those do not remove hardness ions and do not protect appliances like a softener does.

It also pays to locate equipment in a spot with shade and good access. A garage wall near the loop is ideal. If there is no loop, ask for a straight path and a clean bypass manifold. These small installation choices reduce leaks and future labor.

How Grand Canyon Home Services quotes and installs

The team starts with a quick water profile: hardness, chlorine levels, and any well markers. The tech checks the house size, fixture count, and available space. From there, the homeowner receives two or three clear options, each with itemized parts and labor. No guesswork, no vague “good, better, best” labels.

Installation typically takes 3 to 6 hours for a looped home with a carbon tank and softener. Add 1 to 2 hours for an RO with a fridge line. Well homes with iron or UV may take a full day. Before leaving, the tech tests the water, programs the controller, and walks the homeowner through salt loading, filter intervals, and what the bypass valves do.

Service routes cover Peoria, including Vistancia, Westwing Mountain, Fletcher Heights, Parkridge, Camino á Lago, and neighborhoods along Deer Valley Road and Lake Pleasant Parkway. That local footing helps with same‑week installs and maintenance calls.

What homeowners in Peoria usually spend

Across hundreds of installs in the West Valley, the average full home setup in Peoria with whole‑house carbon, a standard softener, and RO lands near $4,200. Smaller homes with a simple carbon filter and RO come in closer to $2,200 to $3,000. Large homes or well houses that add UV and pretreatment average $6,500 to $8,000. These figures reflect code‑compliant installs with clean plumbing, drains, and startup testing.

The monthly equivalent, if spread over five years, often falls between $40 and $120, which is less than many families spend on bottled water and descaling products. The drop in fixture spotting and appliance scale is an immediate, visible change.

Quick homeowner checklist before requesting a quote

• Note how many full bathrooms and the number of people in the home.
• Take a photo of the softener loop or main shutoff area.
• List any current water issues: taste, odor, spotting, dry skin, appliance scale.
• Share if the home uses city water or a private well.
• Decide whether the fridge should receive RO water.

These simple notes help the installer estimate accurately and avoid surprises.

Ready for water that tastes clean and treats your home kindly

A clear, accurate quote starts with a short visit and a quick water test. For reliable water filtration system installation in Peoria, Grand Canyon Home Services brings local experience with city water and area wells, precise sizing, and clean workmanship. Homeowners can request an on‑site estimate, compare two or three right‑sized options, and pick an install date that fits the week.

Call Grand Canyon Home Services to schedule a water test and consultation. The team serves Peoria, AZ and the surrounding neighborhoods, and installs systems that fit the home, the water, and the budget—without guesswork.